3D Model Creation with Autodesk Fusion 360 Answer All Weeks

In this blog you will find the correct answer of the Coursera quiz 3D Model Creation with Autodesk Fusion 360 Answer All Weeks ?mixsaver always try to bring the best blogs and best coupon codes

 

Week 1 quiz

 

1.
Question 1
When selecting a motor, the
first 4 numbers, for example MR2205, represent what?

1 point

2.
Question 2
What is the voltage of a 4s
battery?

1 point

3.
Question 3
If you were designing a
quadcopter that was maneuverable in flight, where would you try to locate the
mass in relation to the thrust plane?

1 point

4.
Question 4
When a sketch dimension has
“fx:” before it, what does that mean?

1 point

5.
Question 5
When using the Marking Menu
in a sketch, what position is the sketch sub menu located?

1 point

Week 2 quiz

 

1.
Question 1
What options are available
when using Extend Surface?

1 point

Tangent.

Natural.

Smooth.

Perpendicular.

2.
Question 2
Linking dimensions in a
sketch can be done in what way(s)?

1 point

Through “Change
Parameters”.

Manually entering a
dimension name.

Selecting multiples while
holding CTRL.

Selecting another dimension
on screen.

3.
Question 3
What options are available
for a mirror feature?

1 point

Features

Components

Bodies

Faces

4.
Question 4
When creating a sketch
offset, how do you reverse the direction of the offset?

1 point

Change the offset value to
a negative.

Offset only works outward.

Select “Reverse Offset” in
the properties.

5.
Question 5
What options are available
for “Project Type” in the sketch project to surface tool?

1 point

Normal to Plane

Closest Point

Normal Vector

Along Vector

 

 

 

Week 3 quiz

 

1.
Question 1
When creating a subdivided
pipe what end types are available?

1 point

Open.

Spike.

Closed.

Square.

2.
Question 2
Once a pipe is created
where in Fusion 360 and you edit the pipe properties?

1 point

Timeline

You can’t edit once created.

Modify menu

Browser

3.
Question 3
What feature in the Sculpt workspace
allows you to joint two subdivided faces together?

1 point

Join

Bridge

Weld

Merge Edge

4.
Question 4
When using soft
modification in the edit form tool, what setting controls how far the edit
affects the subdivided mesh?

1 point

Taper

Spread

Fallout

Falloff

5.
Question 5
Where can you find the
Center of Mass measurement at in Fusion 360?

1 point

Physical material dialog

Inspect tool

Body properties

Measure tool

 

 

Week 4 quiz

 

1.
Question 1
What ways can you add a new
environment to a render scene?

1 point

Double click from the
environment library.

Drag and drop from the
environment library.

Drag and drop from the
appearance library.

Double click from the
appearance library.

2.
Question 2
Where can you adjust the
scene camera settings?

1 point

Scene settings dialog.

Modify menu.

Appearances menu.

Camera settings dialog.

3.
Question 3
When a part has both an
appearance and a physical material applied, which one takes visual priority?

1 point

Appearance

Physical material

4.
Question 4
When a decal is inserted on
a face, what adjustments are available?

1 point

Scale

Translate

White balance

Rotate

5.
Question 5
An in-canvas render
produces an image through what?

1 point

Ray tracing

Cloud processing

Cloud rendering

 

 

Course assessment

 

1.
Question 1
An ESC is an electronic component that goes
between the flight controller and the motor. What does ESC stand for?

1 point

Extended Signal Carrier

Electronic Speed Controller

Electric Speed Circuit

Electronic Signal Center

2.
Question 2
The type of battery used
in most quadcopters is a LiPo because of its good power output and light
weight. There are 3 main variables when
choosing a battery: Voltage, Current,
and Discharge. If I have a LiPo 3S
2000mAh 20-30C battery, how much amperage can it output continuously without
damage?

1 point

60amp

40amp

35amp

20amp

3.
Question 3
Mass on any design can be
critical, but even more so on anything that flies. The overall mass and its location is critical
to performance. If we have 300g worth of
electronic components and 300g worth of body what is the approximate target
weight for a set of batteries assuming 50-65% of the mass is battery? Hint: Solve for two variables. Battery =
X. Total = Y. X = 0.65Y & (300 +
300) = 0.35Y. Solve for Y and then Solve
for X.

1 point

300-600g

600-1100g

500-1000g

550-1200g

4.
Question 4
What is it called when you
insert a design into a current file?

1 point

Linked design

Assembly design

Live design

Distributed design

5.
Question 5
Creating a static rendered
image can be impressive, but a turntable animation can take it to the next
level. What options are available for
number of images in a turntable render?

1 point

6

36

18

12

6.
Question 6
When a sketch line is converted to construction, what happens to its appearance?

1 point

It changes to blue.

It changes to red.

It becomes solid.

It becomes dashed.

7.
Question 7
When a sketch dimension is linked to a parameters, what letters are displayed in front of it?

1 point

Eq.

Ex.

Lk.

Fx.

8.
Question 8
In what workspace do you create a subdivided pipe?

1 point

Model

Sculpt

Patch

Simulation

9.
Question 9
What sculpt feature is used to create a blend between two faces?

1 point

Merge Edge

Bridge

Blend

Combine

10.
Question 10
What is the name of the right click menu to measure a bodies mass?

1 point

Properties

Measure

Mass

Physical Material

 

 

 

Peer-graded Assignment: Model a simple chassis

Download

 

Important Links: